Dunes Fire Table
The Dunes Fire Table takes its softly contoured form from wind-shaped landscapes. Circular layers create a flowing silhouette that softens the lines of modern outdoor architecture.
Key Features
- Material: Marine grade aluminum
- Finish: Premium powder coat
- Design: Softly contoured circular form with layered surfaces
- Construction: Handcrafted with seamless edges and no visible fasteners
- Burner: Brass jet burner matched to the selected opening. Stainless steel alternatives by request
- Fuel: Natural gas or liquid propane; external tanks only
- Ignition: Push-button spark ignition. Compatible safety-shutoff and electronic upgrades where offered
- Certification: Refer to the supplied burner and ignition documentation for component certification
- Applications: Commercial and residential
- Custom: Bespoke designs, materials and finishes available by commission
Important Installation Note
- Some assembly required
- Natural gas or hard-piped propane connections require professional installation
- Any electrical connections must be completed by a licensed professional in accordance with local codes
Materials and finishes
Available materials and finishes depend on the model. The selected product configuration identifies what will be supplied.
Aluminum
Lightweight and corrosion resistant. It allows clean forms with a durable powder-coated exterior.
Steel and stainless steel
Steel provides strength and rigidity. Powder coating adds color and surface protection. Stainless steel offers corrosion resistance with a natural or coated finish where available.
Copper and weathering steel
Smooth and hammered copper develop a natural patina. Weathering steel develops a rust-colored surface over time. Exposure and surroundings influence the result.
Powder coating
A durable exterior finish available in a range of colors and textures. Physical samples are the best way to review a finish. Screen colors are approximate.
Specialty finishes
High-heat ceramic coatings, natural metals and custom finishes are available for suitable designs. Contact us to confirm compatibility and availability.
For powder-coated products, choose “Other Powder Coat Color • Specify Below” where offered to purchase now and confirm your color later. Final color approval is required before finishing.
Clean with mild soap, water and a soft cloth. See care guidance for the supplied material.
What's included
Your fire table includes the burner and ignition system identified in the selected configuration. Internal gas flex lines, fittings and mounting hardware are supplied as appropriate for the design. The burner pan or plate is matched to the feature.
Fire media is a paid option and is not selected by default. Ignition upgrades and accessories are supplied only when selected or expressly listed as included.
Components may be packed separately. Supplier-direct items may arrive in a separate shipment. Final site connections, placement and installation are not included.
Review your selected options and order documents for the complete scope. Qualified professionals must complete the site gas and any electrical connections.
See Options for Burner Information
Ignition details
Available systems depend on the selected burner and fuel. The product options identify the supplied system and any upgrades.
Push-button spark
WT PBIK3.0 is a battery-powered push-button spark ignition. Open the side key valve and use the button to light the burner. Adjust the flame with the key valve. No site electrical service is required. This system does not automatically shut off the gas if the flame goes out.
Mercury
Battery-powered push-button spark ignition with a standing pilot and safety shutoff. The system shuts off gas if the pilot flame is lost. No site electrical service is required. Available for compatible configurations up to 240,000 BTU.
Cobalt
A 12V electronic ignition with flame sensing and automatic relighting. The supplied transformer connects to a suitable 120V electrical supply. Use a compatible external switch or control. Available for compatible configurations up to 490,000 BTU.
Higher-capacity configurations
A Platinum 24V package may be specified where offered for a higher-capacity burner. Its transformer also requires a suitable 120V supply. Confirm the exact package before planning electrical work.
Wi-Fi, Bluetooth and rechargeable app-control packages are not part of the current standard offering. Follow the instructions supplied with the exact ignition system for installation and operation.
Fire media
Lava stone and fire glass are paid options. Neither is selected by default. The quantities shown in your product options are matched to the selected opening.
Use fire-rated media approved for your burner. Follow the supplied instructions for depth and placement. Purchasing media from Modofire is optional; suitable media may still be required for normal operation.
Wind guard details
A glass wind guard helps shelter the flame from moving air and adds a visual boundary around the opening. It remains hot during use. Keep hands and other objects clear. Guards are offered only for compatible models.
Tabletop details
A removable full tabletop provides a continuous surface when the fire is not in use. It may be supplied in sections for handling and storage. Matched to your selected model and size.
Lid details
A removable metal lid is matched to your selected opening. It helps protect the burner system and provides a fuller tabletop surface. The supplied form may vary with the burner configuration.
All-weather cover details
A fitted fabric cover helps protect the feature from weather and debris when it is not in use. Matched to your selected size. Store the cover clear of the feature during operation.
Let the feature cool completely before fitting a lid, tabletop or fabric cover. Accessories are optional and are available only where shown in the product options.
Shipping & Lead Time
Lead times. Most Modofire products are made to order. Quoted production and shipping dates are estimates, not guaranteed delivery dates. Lead times vary with the design, finish, components, and fabrication schedule. We will communicate material changes to the expected shipping schedule. Transit time begins when the carrier receives the shipment.
Shipping and delivery. Products ship from Modofire or our domestic fabrication partners. Shipping method and cost depend on the size, weight, destination, and delivery requirements of the order. Smaller items generally ship by parcel carrier. Large or custom pieces generally ship crated by freight for curbside delivery, with a liftgate when included in the shipping arrangement. Delivery does not include placement, uncrating, assembly, gas or electrical connections, or installation.
Site readiness. The customer is responsible for providing an accurate delivery address, suitable carrier access, and people and equipment needed to receive and move the product from the delivery point. Storage, redelivery, or special-handling charges caused by unavailable access or a missed delivery appointment are the customer’s responsibility. Schedule installation only after shipment has been confirmed and the product has been received and inspected.
Delivery inspection. Inspect the crate and packaging before signing. Note any visible damage on the carrier’s delivery receipt, take photographs, and contact Modofire promptly. If damage is discovered after uncrating, retain the packaging and contact us with photographs as soon as possible, preferably within 48 hours. We will help review the issue and coordinate the appropriate freight claim or resolution.
Delays and related costs. Modofire is not responsible for carrier delays, weather, permitting, site conditions, or other circumstances outside its control. To the extent permitted by law, Modofire is not responsible for costs arising from a delayed delivery, including scheduled installers, equipment, travel, or lost use.
Warranty & Coverage
Each Modofire fire feature is made to order. We stand behind the quality of its materials, fabrication and finish.
Modofire covers the vessel, enclosure, fire table or sculpture against defects in materials and fabrication for five years from delivery. Powder-coated finishes are covered for five years from delivery against premature peeling or blistering caused by application or adhesion defects. This coverage applies to the original purchaser.
Burners carry a lifetime manufacturer’s warranty, subject to the manufacturer’s terms. Lifetime coverage applies only to the burner. Ignition systems, controls and other components carry separate manufacturer warranties. Modofire will help coordinate claims and connect you or your service professional with technical support.
Installation, gas and electrical connections, startup and service must be handled by qualified local professionals. Approved fire media must be installed before regular use according to the burner manufacturer’s instructions. Keep pilot openings, drainage and ventilation clear. Qualified installers may test the system without media when permitted by the manufacturer.
Modofire’s warranty does not cover:
- Normal wear or expected cosmetic changes such as patina, fading, heat discoloration or surface rust.
- Scratches or chips caused during handling or installation.
- Damage from improper installation, incorrect media placement or overheating.
- Damage from blocked ventilation or drainage, standing water, misuse, modification or inadequate maintenance.
Clean powder-coated surfaces with mild detergent and a soft cloth. Rinse thoroughly and remove salt or chemical buildup. Do not use abrasive cleaners or harsh solvents.
To make a claim, contact Modofire with proof of purchase, photographs and a description of the issue before returning any part. Modofire will repair or replace covered vessel or finish defects at its discretion. Removal, reinstallation, on-site labor, freight and related costs are not covered by Modofire’s warranty. Component claims follow the applicable manufacturer’s warranty terms and process.
Returns & Cancellations
Most Modofire products are made to order for a specific project. These terms reflect the work and materials committed to each order.
Cancellations. Orders may be cancelled for a full refund before project-specific design begins, materials are purchased or fabrication starts. After design work begins or materials are purchased, cancellation requires Modofire’s approval. Any refund will be reduced by costs already incurred. Once fabrication begins, made-to-order products cannot be cancelled except as required by law.
Made-to-order products. Custom-fabricated fire tables, fire features, vessels, planters and sculptures are not eligible for return after delivery.
Burners and technical components. Burners, ignition systems, controls and other project-specified components cannot be returned due to a change of mind. Installed components are not eligible for return. Defective components are handled under the applicable manufacturer’s warranty. Incorrect components are handled under the order terms.
Standard accessories. Eligible non-fabricated accessories may be returned within 30 days of delivery with prior authorization. Items must be unused and uninstalled in their original packaging. A 12% restocking fee and return shipping costs may apply. Refunds are issued after receipt and inspection.
Finish variations. Natural variations in color, texture and patina are characteristics of the materials and finishes. These variations alone are not defects.
Problems with an order. Contact Modofire before returning any damaged, incorrect or potentially defective item. We will review the issue under the applicable order terms or our Warranty & Coverage policy. If Modofire cannot fulfill an order, we will issue a full refund.
Maintenance and care
Routine cleaning and seasonal inspection help preserve the finish and reliable operation. Let the feature cool completely. Turn off the gas and disconnect electrical power as directed before maintenance.
Powder-coated surfaces
Wash with mild soap, water and a soft cloth. Rinse and dry gently. Avoid abrasives, solvents, bleach and pressure washing. Remove salt and pool chemicals promptly. Clean more often in coastal or poolside settings.
Natural metals and specialty finishes
Copper and weathering steel develop a changing patina. Their appearance will evolve outdoors. Follow the care guidance for the supplied finish. Contact us before applying a polish, sealer or coating.
Burner and ignition
Keep the opening clear of leaves and debris. Check the burner and ignition before seasonal use. Follow the manufacturer's cleaning instructions. Do not drill, modify or alter the supplied burner. Have damaged connections or ignition components serviced by a qualified professional.
Media and accessories
Use approved fire media in the depth and arrangement specified for the burner. Fit lids, full tabletops and fabric covers only after the feature has cooled completely. Keep drainage and ventilation paths clear.
Water features and winter care
Maintain pumps, lighting and water systems according to their supplied instructions. Drain or winterize water components where freezing conditions require it. Water-feature care depends on the selected equipment and local conditions.
Gas and electrical planning
Start with the selected product size, fuel, burner input and ignition system. Give the product information sheet and manufacturer instructions to your contractor before preparing site services.
Gas supply
A qualified gas professional must size the supply for the burner input, fuel, available pressure and total developed pipe length. Fittings and other connected appliances affect the calculation. The connection size on the feature does not determine the required site pipe size.
The chart is a planning reference with stated supply assumptions. Your installer must confirm the conditions for the actual installation. Modofire does not design the site gas system.
Does the ignition need electricity?
- Push-button spark: battery powered. No site electrical supply.
- Mercury: battery powered with pilot-loss safety shutoff. No site electrical supply.
- Cobalt: 12V ignition supplied through a transformer connected to a suitable 120V supply.
- Platinum, where specified: 24V ignition supplied through a transformer connected to a suitable 120V supply.
A qualified electrical professional must provide the required outdoor-rated service and protection. Confirm transformer placement and the manufacturer's cable limits before running wiring.
Where do the connections enter?
Use a verified drawing for the selected model and size. Utility entry locations can vary. If your information sheet does not show a confirmed entry location, contact Modofire before setting a gas stub, conduit or anchor.
Propane configurations
Use only the tank arrangement specified for the selected product. Internal-tank models have model-specific requirements. A horizontal-tank design requires a purpose-built horizontal propane tank; a standard upright cylinder must not be laid on its side.
Other connected components
Pumps and lighting have their own electrical requirements when selected. Review their supplied specifications separately from the ignition system.
Prepare a prompt for popular AI image generators and design tools using your selected options and the product photos. Copy it and open a platform below, then paste it there to create your image, layout, model or video.
Describe your setting in Additional Direction.
Fine-Tune the Scene
Visual direction only. Product size and finish stay as selected.
For a CAD-capable assistant. Product photos and selected dimensions guide a conceptual model; construction details still need review.
For best consistency, attach an approved product render as the starting image in your video tool. This prepares a prompt; video is created there.
Copy Prompt & Open AI Platform
Click a platform logo or name to copy your prompt and open its website. Paste and review the prompt there. Codex opens its installed app. You may need to attach product photos; access and credits depend on the service.
View / Edit Prompt
Selected Product Details
Build a prompt to review the selected options included.
Loading prompt controls…
AI concepts can differ from the actual product. Review size, finish and details with Modofire before ordering or fabrication. This tool does not change your selections or generate images.
Dunes Fire Table
The Dunes Fire Table takes its softly contoured form from wind-shaped landscapes. Circular layers create a flowing silhouette that softens the lines of modern outdoor architecture.
Key Features
- Material: Marine grade aluminum
- Finish: Premium powder coat
- Design: Softly contoured circular form with layered surfaces
- Construction: Handcrafted with seamless edges and no visible fasteners
- Burner: Brass jet burner matched to the selected opening. Stainless steel alternatives by request
- Fuel: Natural gas or liquid propane; external tanks only
- Ignition: Push-button spark ignition. Compatible safety-shutoff and electronic upgrades where offered
- Certification: Refer to the supplied burner and ignition documentation for component certification
- Applications: Commercial and residential
- Custom: Bespoke designs, materials and finishes available by commission
Important Installation Note
- Some assembly required
- Natural gas or hard-piped propane connections require professional installation
- Any electrical connections must be completed by a licensed professional in accordance with local codes
Materials and finishes
Available materials and finishes depend on the model. The selected product configuration identifies what will be supplied.
Aluminum
Lightweight and corrosion resistant. It allows clean forms with a durable powder-coated exterior.
Steel and stainless steel
Steel provides strength and rigidity. Powder coating adds color and surface protection. Stainless steel offers corrosion resistance with a natural or coated finish where available.
Copper and weathering steel
Smooth and hammered copper develop a natural patina. Weathering steel develops a rust-colored surface over time. Exposure and surroundings influence the result.
Powder coating
A durable exterior finish available in a range of colors and textures. Physical samples are the best way to review a finish. Screen colors are approximate.
Specialty finishes
High-heat ceramic coatings, natural metals and custom finishes are available for suitable designs. Contact us to confirm compatibility and availability.
For powder-coated products, choose “Other Powder Coat Color • Specify Below” where offered to purchase now and confirm your color later. Final color approval is required before finishing.
Clean with mild soap, water and a soft cloth. See care guidance for the supplied material.
What's included
Your fire table includes the burner and ignition system identified in the selected configuration. Internal gas flex lines, fittings and mounting hardware are supplied as appropriate for the design. The burner pan or plate is matched to the feature.
Fire media is a paid option and is not selected by default. Ignition upgrades and accessories are supplied only when selected or expressly listed as included.
Components may be packed separately. Supplier-direct items may arrive in a separate shipment. Final site connections, placement and installation are not included.
Review your selected options and order documents for the complete scope. Qualified professionals must complete the site gas and any electrical connections.
See Options for Burner Information
Ignition details
Available systems depend on the selected burner and fuel. The product options identify the supplied system and any upgrades.
Push-button spark
WT PBIK3.0 is a battery-powered push-button spark ignition. Open the side key valve and use the button to light the burner. Adjust the flame with the key valve. No site electrical service is required. This system does not automatically shut off the gas if the flame goes out.
Mercury
Battery-powered push-button spark ignition with a standing pilot and safety shutoff. The system shuts off gas if the pilot flame is lost. No site electrical service is required. Available for compatible configurations up to 240,000 BTU.
Cobalt
A 12V electronic ignition with flame sensing and automatic relighting. The supplied transformer connects to a suitable 120V electrical supply. Use a compatible external switch or control. Available for compatible configurations up to 490,000 BTU.
Higher-capacity configurations
A Platinum 24V package may be specified where offered for a higher-capacity burner. Its transformer also requires a suitable 120V supply. Confirm the exact package before planning electrical work.
Wi-Fi, Bluetooth and rechargeable app-control packages are not part of the current standard offering. Follow the instructions supplied with the exact ignition system for installation and operation.
Fire media
Lava stone and fire glass are paid options. Neither is selected by default. The quantities shown in your product options are matched to the selected opening.
Use fire-rated media approved for your burner. Follow the supplied instructions for depth and placement. Purchasing media from Modofire is optional; suitable media may still be required for normal operation.
Wind guard details
A glass wind guard helps shelter the flame from moving air and adds a visual boundary around the opening. It remains hot during use. Keep hands and other objects clear. Guards are offered only for compatible models.
Tabletop details
A removable full tabletop provides a continuous surface when the fire is not in use. It may be supplied in sections for handling and storage. Matched to your selected model and size.
Lid details
A removable metal lid is matched to your selected opening. It helps protect the burner system and provides a fuller tabletop surface. The supplied form may vary with the burner configuration.
All-weather cover details
A fitted fabric cover helps protect the feature from weather and debris when it is not in use. Matched to your selected size. Store the cover clear of the feature during operation.
Let the feature cool completely before fitting a lid, tabletop or fabric cover. Accessories are optional and are available only where shown in the product options.
Shipping & Lead Time
Lead times. Most Modofire products are made to order. Quoted production and shipping dates are estimates, not guaranteed delivery dates. Lead times vary with the design, finish, components, and fabrication schedule. We will communicate material changes to the expected shipping schedule. Transit time begins when the carrier receives the shipment.
Shipping and delivery. Products ship from Modofire or our domestic fabrication partners. Shipping method and cost depend on the size, weight, destination, and delivery requirements of the order. Smaller items generally ship by parcel carrier. Large or custom pieces generally ship crated by freight for curbside delivery, with a liftgate when included in the shipping arrangement. Delivery does not include placement, uncrating, assembly, gas or electrical connections, or installation.
Site readiness. The customer is responsible for providing an accurate delivery address, suitable carrier access, and people and equipment needed to receive and move the product from the delivery point. Storage, redelivery, or special-handling charges caused by unavailable access or a missed delivery appointment are the customer’s responsibility. Schedule installation only after shipment has been confirmed and the product has been received and inspected.
Delivery inspection. Inspect the crate and packaging before signing. Note any visible damage on the carrier’s delivery receipt, take photographs, and contact Modofire promptly. If damage is discovered after uncrating, retain the packaging and contact us with photographs as soon as possible, preferably within 48 hours. We will help review the issue and coordinate the appropriate freight claim or resolution.
Delays and related costs. Modofire is not responsible for carrier delays, weather, permitting, site conditions, or other circumstances outside its control. To the extent permitted by law, Modofire is not responsible for costs arising from a delayed delivery, including scheduled installers, equipment, travel, or lost use.
Warranty & Coverage
Each Modofire fire feature is made to order. We stand behind the quality of its materials, fabrication and finish.
Modofire covers the vessel, enclosure, fire table or sculpture against defects in materials and fabrication for five years from delivery. Powder-coated finishes are covered for five years from delivery against premature peeling or blistering caused by application or adhesion defects. This coverage applies to the original purchaser.
Burners carry a lifetime manufacturer’s warranty, subject to the manufacturer’s terms. Lifetime coverage applies only to the burner. Ignition systems, controls and other components carry separate manufacturer warranties. Modofire will help coordinate claims and connect you or your service professional with technical support.
Installation, gas and electrical connections, startup and service must be handled by qualified local professionals. Approved fire media must be installed before regular use according to the burner manufacturer’s instructions. Keep pilot openings, drainage and ventilation clear. Qualified installers may test the system without media when permitted by the manufacturer.
Modofire’s warranty does not cover:
- Normal wear or expected cosmetic changes such as patina, fading, heat discoloration or surface rust.
- Scratches or chips caused during handling or installation.
- Damage from improper installation, incorrect media placement or overheating.
- Damage from blocked ventilation or drainage, standing water, misuse, modification or inadequate maintenance.
Clean powder-coated surfaces with mild detergent and a soft cloth. Rinse thoroughly and remove salt or chemical buildup. Do not use abrasive cleaners or harsh solvents.
To make a claim, contact Modofire with proof of purchase, photographs and a description of the issue before returning any part. Modofire will repair or replace covered vessel or finish defects at its discretion. Removal, reinstallation, on-site labor, freight and related costs are not covered by Modofire’s warranty. Component claims follow the applicable manufacturer’s warranty terms and process.
Returns & Cancellations
Most Modofire products are made to order for a specific project. These terms reflect the work and materials committed to each order.
Cancellations. Orders may be cancelled for a full refund before project-specific design begins, materials are purchased or fabrication starts. After design work begins or materials are purchased, cancellation requires Modofire’s approval. Any refund will be reduced by costs already incurred. Once fabrication begins, made-to-order products cannot be cancelled except as required by law.
Made-to-order products. Custom-fabricated fire tables, fire features, vessels, planters and sculptures are not eligible for return after delivery.
Burners and technical components. Burners, ignition systems, controls and other project-specified components cannot be returned due to a change of mind. Installed components are not eligible for return. Defective components are handled under the applicable manufacturer’s warranty. Incorrect components are handled under the order terms.
Standard accessories. Eligible non-fabricated accessories may be returned within 30 days of delivery with prior authorization. Items must be unused and uninstalled in their original packaging. A 12% restocking fee and return shipping costs may apply. Refunds are issued after receipt and inspection.
Finish variations. Natural variations in color, texture and patina are characteristics of the materials and finishes. These variations alone are not defects.
Problems with an order. Contact Modofire before returning any damaged, incorrect or potentially defective item. We will review the issue under the applicable order terms or our Warranty & Coverage policy. If Modofire cannot fulfill an order, we will issue a full refund.
Maintenance and care
Routine cleaning and seasonal inspection help preserve the finish and reliable operation. Let the feature cool completely. Turn off the gas and disconnect electrical power as directed before maintenance.
Powder-coated surfaces
Wash with mild soap, water and a soft cloth. Rinse and dry gently. Avoid abrasives, solvents, bleach and pressure washing. Remove salt and pool chemicals promptly. Clean more often in coastal or poolside settings.
Natural metals and specialty finishes
Copper and weathering steel develop a changing patina. Their appearance will evolve outdoors. Follow the care guidance for the supplied finish. Contact us before applying a polish, sealer or coating.
Burner and ignition
Keep the opening clear of leaves and debris. Check the burner and ignition before seasonal use. Follow the manufacturer's cleaning instructions. Do not drill, modify or alter the supplied burner. Have damaged connections or ignition components serviced by a qualified professional.
Media and accessories
Use approved fire media in the depth and arrangement specified for the burner. Fit lids, full tabletops and fabric covers only after the feature has cooled completely. Keep drainage and ventilation paths clear.
Water features and winter care
Maintain pumps, lighting and water systems according to their supplied instructions. Drain or winterize water components where freezing conditions require it. Water-feature care depends on the selected equipment and local conditions.
Gas and electrical planning
Start with the selected product size, fuel, burner input and ignition system. Give the product information sheet and manufacturer instructions to your contractor before preparing site services.
Gas supply
A qualified gas professional must size the supply for the burner input, fuel, available pressure and total developed pipe length. Fittings and other connected appliances affect the calculation. The connection size on the feature does not determine the required site pipe size.
The chart is a planning reference with stated supply assumptions. Your installer must confirm the conditions for the actual installation. Modofire does not design the site gas system.
Does the ignition need electricity?
- Push-button spark: battery powered. No site electrical supply.
- Mercury: battery powered with pilot-loss safety shutoff. No site electrical supply.
- Cobalt: 12V ignition supplied through a transformer connected to a suitable 120V supply.
- Platinum, where specified: 24V ignition supplied through a transformer connected to a suitable 120V supply.
A qualified electrical professional must provide the required outdoor-rated service and protection. Confirm transformer placement and the manufacturer's cable limits before running wiring.
Where do the connections enter?
Use a verified drawing for the selected model and size. Utility entry locations can vary. If your information sheet does not show a confirmed entry location, contact Modofire before setting a gas stub, conduit or anchor.
Propane configurations
Use only the tank arrangement specified for the selected product. Internal-tank models have model-specific requirements. A horizontal-tank design requires a purpose-built horizontal propane tank; a standard upright cylinder must not be laid on its side.
Other connected components
Pumps and lighting have their own electrical requirements when selected. Review their supplied specifications separately from the ignition system.
Prepare a prompt for popular AI image generators and design tools using your selected options and the product photos. Copy it and open a platform below, then paste it there to create your image, layout, model or video.
Describe your setting in Additional Direction.
Fine-Tune the Scene
Visual direction only. Product size and finish stay as selected.
For a CAD-capable assistant. Product photos and selected dimensions guide a conceptual model; construction details still need review.
For best consistency, attach an approved product render as the starting image in your video tool. This prepares a prompt; video is created there.
Copy Prompt & Open AI Platform
Click a platform logo or name to copy your prompt and open its website. Paste and review the prompt there. Codex opens its installed app. You may need to attach product photos; access and credits depend on the service.
View / Edit Prompt
Selected Product Details
Build a prompt to review the selected options included.
Loading prompt controls…
AI concepts can differ from the actual product. Review size, finish and details with Modofire before ordering or fabrication. This tool does not change your selections or generate images.