Linear CROSSFIRE® Brass Burner with WATERSTOP®
A high-performance linear jet burner engineered to produce a dense, highly active flame pattern using precision porting rather than open pipe. This design delivers a fuller, more dynamic flame with increased efficiency, allowing for stronger flame presence with less overall gas compared to traditional pipe-style burners.
Fabricated from solid brass, this burner offers excellent thermal mass and heat retention, supporting consistent ignition and stable flame characteristics across the entire length. Over time, the brass develops a natural patina, adding depth and character to the installation. The integrated WATERSTOP® feature provides added protection against water intrusion, making it well suited for exposed outdoor environments.
Compared to stainless steel linear burners, this system produces a more concentrated and visually active flame, with greater efficiency per inch of burner. Stainless steel remains a strong option for highly corrosive environments such as coastal or chlorinated settings, where maintaining a consistent appearance is a priority, but it typically delivers a more linear and less dense flame profile.
When compared to Pro Series brass burners, this design represents a more advanced approach to flame generation. Pro Series burners rely on traditional ported pipe configurations that provide solid and reliable performance with broader flame distribution. This system, however, uses engineered jet porting to create a denser, more uniform flame with higher output relative to its size, making it the preferred option when maximum flame presence and efficiency are the priority.
Available Sizes and BTU Output
• 17.75" • Up to 90,000 BTU
• 21.75" • Up to 110,000 BTU
• 25.75" • Up to 130,000 BTU
• 29.75" • Up to 150,000 BTU
• 33.75" • Up to 170,000 BTU
• 37.75" • Up to 190,000 BTU
• 41.75" • Up to 210,000 BTU
• 49.75" • Up to 250,000 BTU
• 53.75" • Up to 270,000 BTU
Compatible with natural gas and propane systems.
Ignition Systems
Available ignition options depend on the selected burner and configuration.
Push-Button Spark Ignition
Battery-powered spark ignition with manual key-valve control. No site power is required. This system does not provide automatic flame monitoring or relighting.
Push-Button Ignition with Flame Sensing
Battery-powered ignition with flame monitoring and automatic gas shutoff if the flame is lost. Flame height is adjusted using a control dial. No site power or decorative key valve is required.
Electronic Ignition with Flame Sensing
Switch-operated ignition with flame monitoring and safety shutoff. Flame height is adjusted using a key valve. A compatible power supply is required; a rechargeable battery-powered option is available under electrical accessories where site power is unavailable.
Remote controls, app control, automatic relighting and automation compatibility depend on the selected system. WiFi may require an optional hub. See the product options for available configurations.
Shipping & Lead Time
Lead times. Most Modofire products are made to order. Quoted production and shipping dates are estimates, not guaranteed delivery dates. Lead times vary with the design, finish, components, and fabrication schedule. We will communicate material changes to the expected shipping schedule. Transit time begins when the carrier receives the shipment.
Shipping and delivery. Products ship from Modofire or our domestic fabrication partners. Shipping method and cost depend on the size, weight, destination, and delivery requirements of the order. Smaller items generally ship by parcel carrier. Large or custom pieces generally ship crated by freight for curbside delivery, with a liftgate when included in the shipping arrangement. Delivery does not include placement, uncrating, assembly, gas or electrical connections, or installation.
Site readiness. The customer is responsible for providing an accurate delivery address, suitable carrier access, and people and equipment needed to receive and move the product from the delivery point. Storage, redelivery, or special-handling charges caused by unavailable access or a missed delivery appointment are the customer’s responsibility. Schedule installation only after shipment has been confirmed and the product has been received and inspected.
Delivery inspection. Inspect the crate and packaging before signing. Note any visible damage on the carrier’s delivery receipt, take photographs, and contact Modofire promptly. If damage is discovered after uncrating, retain the packaging and contact us with photographs as soon as possible, preferably within 48 hours. We will help review the issue and coordinate the appropriate freight claim or resolution.
Delays and related costs. Modofire is not responsible for carrier delays, weather, permitting, site conditions, or other circumstances outside its control. To the extent permitted by law, Modofire is not responsible for costs arising from a delayed delivery, including scheduled installers, equipment, travel, or lost use.
Warranty & Coverage
Each Modofire fire feature is made to order. We stand behind the quality of its materials, fabrication and finish.
Modofire covers the vessel, enclosure, fire table or sculpture against defects in materials and fabrication for five years from delivery. Powder-coated finishes are covered for five years from delivery against premature peeling or blistering caused by application or adhesion defects. This coverage applies to the original purchaser.
Burners carry a lifetime manufacturer’s warranty, subject to the manufacturer’s terms. Lifetime coverage applies only to the burner. Ignition systems, controls and other components carry separate manufacturer warranties. Modofire will help coordinate claims and connect you or your service professional with technical support.
Installation, gas and electrical connections, startup and service must be handled by qualified local professionals. Approved fire media must be installed before regular use according to the burner manufacturer’s instructions. Keep pilot openings, drainage and ventilation clear. Qualified installers may test the system without media when permitted by the manufacturer.
Modofire’s warranty does not cover:
- Normal wear or expected cosmetic changes such as patina, fading, heat discoloration or surface rust.
- Scratches or chips caused during handling or installation.
- Damage from improper installation, incorrect media placement or overheating.
- Damage from blocked ventilation or drainage, standing water, misuse, modification or inadequate maintenance.
Clean powder-coated surfaces with mild detergent and a soft cloth. Rinse thoroughly and remove salt or chemical buildup. Do not use abrasive cleaners or harsh solvents.
To make a claim, contact Modofire with proof of purchase, photographs and a description of the issue before returning any part. Modofire will repair or replace covered vessel or finish defects at its discretion. Removal, reinstallation, on-site labor, freight and related costs are not covered by Modofire’s warranty. Component claims follow the applicable manufacturer’s warranty terms and process.
Returns & Cancellations
Most Modofire products are made to order for a specific project. These terms reflect the work and materials committed to each order.
Cancellations. Orders may be cancelled for a full refund before project-specific design begins, materials are purchased or fabrication starts. After design work begins or materials are purchased, cancellation requires Modofire’s approval. Any refund will be reduced by costs already incurred. Once fabrication begins, made-to-order products cannot be cancelled except as required by law.
Made-to-order products. Custom-fabricated fire tables, fire features, vessels, planters and sculptures are not eligible for return after delivery.
Burners and technical components. Burners, ignition systems, controls and other project-specified components cannot be returned due to a change of mind. Installed components are not eligible for return. Defective components are handled under the applicable manufacturer’s warranty. Incorrect components are handled under the order terms.
Standard accessories. Eligible non-fabricated accessories may be returned within 30 days of delivery with prior authorization. Items must be unused and uninstalled in their original packaging. A 12% restocking fee and return shipping costs may apply. Refunds are issued after receipt and inspection.
Finish variations. Natural variations in color, texture and patina are characteristics of the materials and finishes. These variations alone are not defects.
Problems with an order. Contact Modofire before returning any damaged, incorrect or potentially defective item. We will review the issue under the applicable order terms or our Warranty & Coverage policy. If Modofire cannot fulfill an order, we will issue a full refund.
Linear CROSSFIRE® Brass Burner with WATERSTOP® • Linear
- Unit price
- / per
CSA Certified Burner Systems
Adding product to your cart
Linear CROSSFIRE® Brass Burner with WATERSTOP®
A high-performance linear jet burner engineered to produce a dense, highly active flame pattern using precision porting rather than open pipe. This design delivers a fuller, more dynamic flame with increased efficiency, allowing for stronger flame presence with less overall gas compared to traditional pipe-style burners.
Fabricated from solid brass, this burner offers excellent thermal mass and heat retention, supporting consistent ignition and stable flame characteristics across the entire length. Over time, the brass develops a natural patina, adding depth and character to the installation. The integrated WATERSTOP® feature provides added protection against water intrusion, making it well suited for exposed outdoor environments.
Compared to stainless steel linear burners, this system produces a more concentrated and visually active flame, with greater efficiency per inch of burner. Stainless steel remains a strong option for highly corrosive environments such as coastal or chlorinated settings, where maintaining a consistent appearance is a priority, but it typically delivers a more linear and less dense flame profile.
When compared to Pro Series brass burners, this design represents a more advanced approach to flame generation. Pro Series burners rely on traditional ported pipe configurations that provide solid and reliable performance with broader flame distribution. This system, however, uses engineered jet porting to create a denser, more uniform flame with higher output relative to its size, making it the preferred option when maximum flame presence and efficiency are the priority.
Available Sizes and BTU Output
• 17.75" • Up to 90,000 BTU
• 21.75" • Up to 110,000 BTU
• 25.75" • Up to 130,000 BTU
• 29.75" • Up to 150,000 BTU
• 33.75" • Up to 170,000 BTU
• 37.75" • Up to 190,000 BTU
• 41.75" • Up to 210,000 BTU
• 49.75" • Up to 250,000 BTU
• 53.75" • Up to 270,000 BTU
Compatible with natural gas and propane systems.
Ignition Systems
Available ignition options depend on the selected burner and configuration.
Push-Button Spark Ignition
Battery-powered spark ignition with manual key-valve control. No site power is required. This system does not provide automatic flame monitoring or relighting.
Push-Button Ignition with Flame Sensing
Battery-powered ignition with flame monitoring and automatic gas shutoff if the flame is lost. Flame height is adjusted using a control dial. No site power or decorative key valve is required.
Electronic Ignition with Flame Sensing
Switch-operated ignition with flame monitoring and safety shutoff. Flame height is adjusted using a key valve. A compatible power supply is required; a rechargeable battery-powered option is available under electrical accessories where site power is unavailable.
Remote controls, app control, automatic relighting and automation compatibility depend on the selected system. WiFi may require an optional hub. See the product options for available configurations.
Shipping & Lead Time
Lead times. Most Modofire products are made to order. Quoted production and shipping dates are estimates, not guaranteed delivery dates. Lead times vary with the design, finish, components, and fabrication schedule. We will communicate material changes to the expected shipping schedule. Transit time begins when the carrier receives the shipment.
Shipping and delivery. Products ship from Modofire or our domestic fabrication partners. Shipping method and cost depend on the size, weight, destination, and delivery requirements of the order. Smaller items generally ship by parcel carrier. Large or custom pieces generally ship crated by freight for curbside delivery, with a liftgate when included in the shipping arrangement. Delivery does not include placement, uncrating, assembly, gas or electrical connections, or installation.
Site readiness. The customer is responsible for providing an accurate delivery address, suitable carrier access, and people and equipment needed to receive and move the product from the delivery point. Storage, redelivery, or special-handling charges caused by unavailable access or a missed delivery appointment are the customer’s responsibility. Schedule installation only after shipment has been confirmed and the product has been received and inspected.
Delivery inspection. Inspect the crate and packaging before signing. Note any visible damage on the carrier’s delivery receipt, take photographs, and contact Modofire promptly. If damage is discovered after uncrating, retain the packaging and contact us with photographs as soon as possible, preferably within 48 hours. We will help review the issue and coordinate the appropriate freight claim or resolution.
Delays and related costs. Modofire is not responsible for carrier delays, weather, permitting, site conditions, or other circumstances outside its control. To the extent permitted by law, Modofire is not responsible for costs arising from a delayed delivery, including scheduled installers, equipment, travel, or lost use.
Warranty & Coverage
Each Modofire fire feature is made to order. We stand behind the quality of its materials, fabrication and finish.
Modofire covers the vessel, enclosure, fire table or sculpture against defects in materials and fabrication for five years from delivery. Powder-coated finishes are covered for five years from delivery against premature peeling or blistering caused by application or adhesion defects. This coverage applies to the original purchaser.
Burners carry a lifetime manufacturer’s warranty, subject to the manufacturer’s terms. Lifetime coverage applies only to the burner. Ignition systems, controls and other components carry separate manufacturer warranties. Modofire will help coordinate claims and connect you or your service professional with technical support.
Installation, gas and electrical connections, startup and service must be handled by qualified local professionals. Approved fire media must be installed before regular use according to the burner manufacturer’s instructions. Keep pilot openings, drainage and ventilation clear. Qualified installers may test the system without media when permitted by the manufacturer.
Modofire’s warranty does not cover:
- Normal wear or expected cosmetic changes such as patina, fading, heat discoloration or surface rust.
- Scratches or chips caused during handling or installation.
- Damage from improper installation, incorrect media placement or overheating.
- Damage from blocked ventilation or drainage, standing water, misuse, modification or inadequate maintenance.
Clean powder-coated surfaces with mild detergent and a soft cloth. Rinse thoroughly and remove salt or chemical buildup. Do not use abrasive cleaners or harsh solvents.
To make a claim, contact Modofire with proof of purchase, photographs and a description of the issue before returning any part. Modofire will repair or replace covered vessel or finish defects at its discretion. Removal, reinstallation, on-site labor, freight and related costs are not covered by Modofire’s warranty. Component claims follow the applicable manufacturer’s warranty terms and process.
Returns & Cancellations
Most Modofire products are made to order for a specific project. These terms reflect the work and materials committed to each order.
Cancellations. Orders may be cancelled for a full refund before project-specific design begins, materials are purchased or fabrication starts. After design work begins or materials are purchased, cancellation requires Modofire’s approval. Any refund will be reduced by costs already incurred. Once fabrication begins, made-to-order products cannot be cancelled except as required by law.
Made-to-order products. Custom-fabricated fire tables, fire features, vessels, planters and sculptures are not eligible for return after delivery.
Burners and technical components. Burners, ignition systems, controls and other project-specified components cannot be returned due to a change of mind. Installed components are not eligible for return. Defective components are handled under the applicable manufacturer’s warranty. Incorrect components are handled under the order terms.
Standard accessories. Eligible non-fabricated accessories may be returned within 30 days of delivery with prior authorization. Items must be unused and uninstalled in their original packaging. A 12% restocking fee and return shipping costs may apply. Refunds are issued after receipt and inspection.
Finish variations. Natural variations in color, texture and patina are characteristics of the materials and finishes. These variations alone are not defects.
Problems with an order. Contact Modofire before returning any damaged, incorrect or potentially defective item. We will review the issue under the applicable order terms or our Warranty & Coverage policy. If Modofire cannot fulfill an order, we will issue a full refund.