Stainless Steel Round Jet Burner
A multi-ring jet burner designed for round fire features, producing a full, elevated flame pattern across the entire opening. Using integrated jet nozzles, this design compresses gas flow to increase pressure at each port, resulting in a taller, more active flame compared to traditional ring burners. The double-ring configuration enhances coverage and helps create a more balanced and visually dynamic fire.
Constructed from #304 stainless steel, this burner is built for long-term durability in outdoor environments, offering strong resistance to rust, moisture, and weather exposure. Its clean material finish remains consistent over time with minimal discoloration, making it especially well suited for installations near pools or in humid or coastal conditions.
Compared to brass burners, stainless steel offers superior corrosion resistance and lower maintenance in exposed environments. Brass options can provide greater thermal mass and may produce a slightly richer flame in certain configurations, along with developing a natural patina over time. This burner, however, focuses on efficient jet performance, durability, and a clean, modern appearance.
When compared to more advanced jet systems, this design delivers strong flame height and coverage through a straightforward multi-ring layout. It provides a reliable and cost-effective solution with noticeable flame presence, while higher-end jet systems may offer more concentrated output and efficiency per size.
Available Sizes and BTU Output
• 12" Diameter • Up to 90,000 BTU
• Additional sizes available with increasing BTU output based on diameter
Compatible with natural gas and propane systems. For propane applications, an air mixer valve is required.
Key Features
• #304 stainless steel construction
• Multi-ring design for improved flame coverage
• Jet nozzles for higher, more active flame
• Central 1/2" NPT inlet for high-capacity flow
• Suitable for use with lava rock or ceramic media for a natural appearance
Push Button Spark Ignition
Standard on all Modofire fire tables, pits, and sculptures. This manual system uses a push button spark or match to ignite the burner. Flame height is controlled by the key valve.
Low Voltage Electric Ignition with Safety Shutoff
An optional fully automatic ignition system designed for reliable operation in outdoor environments, including near pools or water features. The system relights automatically and shuts off gas if the flame is lost. Ignition can be controlled by a wall switch, remote, Bluetooth, or WiFi, depending on configuration.
Shipping and Lead Time
Shipping Method: Products ship from Modofire or domestic fabrication partners. Shipping method and cost are based on product size, weight, destination, and delivery requirements.
Delivery Type: Smaller items ship via standard ground carriers. Larger fire pits, fire tables, and custom fabrications ship crated by freight with curbside liftgate delivery and a scheduled appointment. Placement, uncrating, and installation are not included.
Shipping Charges and Inspection: Shipping charges are calculated at checkout or quoted separately for large or custom orders. Customers are responsible for ensuring site access and must inspect all deliveries upon arrival. Any visible damage must be noted on the carrier paperwork before signing.
Lead Time: Most products are made to order. Lead times vary by product, finish, and burner system and are provided as estimates only. Transit time begins once the order ships. Modofire is not responsible for delays caused by carriers, weather, or site access conditions.
Installation Timing: Installation should be scheduled only after shipment confirmation is received.
Warranty & Coverage
Warranty coverage is divided between the fire vessel and the burner and control components.
Fire Vessel and Enclosure
5 year limited warranty covering structural defects in materials and workmanship under normal outdoor use. Surface finishes, patina, and cosmetic changes are not considered structural and are excluded.
Burners and Components
Burners in stainless steel or brass carry a lifetime warranty. Electronics and gas valves are covered for 3 years residential and 1 year commercial. Pilot assemblies are covered for 2 years residential and 1 year commercial. Stainless steel burner pans and valve boxes are covered for 5 years residential and 1 year commercial.
Terms and Exclusions
Warranty begins at shipment and covers replacement parts and factory repair labor only. Installation, removal, freight, and on site labor are excluded. Normal wear, finish variation, heat discoloration, misuse, improper installation, unauthorized modifications, and indirect damages are not covered.
Returns and Cancellations
Most Modofire products are custom made to order and fabricated specifically for each project.
Cancellations
Orders cancelled within 72 hours receive a full refund. Cancellations after 72 hours and before production are subject to a 3 percent fee. Once production or shipping begins, orders cannot be cancelled.
Returns
Custom and made to order products are not eligible for return. This includes fire pits, fire tables, bowls, planters, sculptures, and all fabricated aluminum, steel, or concrete products.
Standard Items
Eligible standard items must be unused, in original packaging, and returned within 30 days of delivery with prior authorization. A 12 percent restocking fee applies and return shipping is the responsibility of the buyer. Refunds are issued after inspection.
Finish Variations
Minor variations in color, texture, or finish are inherent to the fabrication process and are not considered defects.
Exceptions
If Modofire is unable to fulfill an order due to production or material constraints, a full refund will be issued.
Contact us for Custom Sizes, Shapes, BTUs, and Trade Programs.
CSA Certified Burner Systems
Shipping Calculated at Checkout
Need help? Custom Sizes or Colors? Contact us
Your details are protected and safe with us.
Adding product to your cart
Stainless Steel Round Jet Burner
A multi-ring jet burner designed for round fire features, producing a full, elevated flame pattern across the entire opening. Using integrated jet nozzles, this design compresses gas flow to increase pressure at each port, resulting in a taller, more active flame compared to traditional ring burners. The double-ring configuration enhances coverage and helps create a more balanced and visually dynamic fire.
Constructed from #304 stainless steel, this burner is built for long-term durability in outdoor environments, offering strong resistance to rust, moisture, and weather exposure. Its clean material finish remains consistent over time with minimal discoloration, making it especially well suited for installations near pools or in humid or coastal conditions.
Compared to brass burners, stainless steel offers superior corrosion resistance and lower maintenance in exposed environments. Brass options can provide greater thermal mass and may produce a slightly richer flame in certain configurations, along with developing a natural patina over time. This burner, however, focuses on efficient jet performance, durability, and a clean, modern appearance.
When compared to more advanced jet systems, this design delivers strong flame height and coverage through a straightforward multi-ring layout. It provides a reliable and cost-effective solution with noticeable flame presence, while higher-end jet systems may offer more concentrated output and efficiency per size.
Available Sizes and BTU Output
• 12" Diameter • Up to 90,000 BTU
• Additional sizes available with increasing BTU output based on diameter
Compatible with natural gas and propane systems. For propane applications, an air mixer valve is required.
Key Features
• #304 stainless steel construction
• Multi-ring design for improved flame coverage
• Jet nozzles for higher, more active flame
• Central 1/2" NPT inlet for high-capacity flow
• Suitable for use with lava rock or ceramic media for a natural appearance
Push Button Spark Ignition
Standard on all Modofire fire tables, pits, and sculptures. This manual system uses a push button spark or match to ignite the burner. Flame height is controlled by the key valve.
Low Voltage Electric Ignition with Safety Shutoff
An optional fully automatic ignition system designed for reliable operation in outdoor environments, including near pools or water features. The system relights automatically and shuts off gas if the flame is lost. Ignition can be controlled by a wall switch, remote, Bluetooth, or WiFi, depending on configuration.
Shipping and Lead Time
Shipping Method: Products ship from Modofire or domestic fabrication partners. Shipping method and cost are based on product size, weight, destination, and delivery requirements.
Delivery Type: Smaller items ship via standard ground carriers. Larger fire pits, fire tables, and custom fabrications ship crated by freight with curbside liftgate delivery and a scheduled appointment. Placement, uncrating, and installation are not included.
Shipping Charges and Inspection: Shipping charges are calculated at checkout or quoted separately for large or custom orders. Customers are responsible for ensuring site access and must inspect all deliveries upon arrival. Any visible damage must be noted on the carrier paperwork before signing.
Lead Time: Most products are made to order. Lead times vary by product, finish, and burner system and are provided as estimates only. Transit time begins once the order ships. Modofire is not responsible for delays caused by carriers, weather, or site access conditions.
Installation Timing: Installation should be scheduled only after shipment confirmation is received.
Warranty & Coverage
Warranty coverage is divided between the fire vessel and the burner and control components.
Fire Vessel and Enclosure
5 year limited warranty covering structural defects in materials and workmanship under normal outdoor use. Surface finishes, patina, and cosmetic changes are not considered structural and are excluded.
Burners and Components
Burners in stainless steel or brass carry a lifetime warranty. Electronics and gas valves are covered for 3 years residential and 1 year commercial. Pilot assemblies are covered for 2 years residential and 1 year commercial. Stainless steel burner pans and valve boxes are covered for 5 years residential and 1 year commercial.
Terms and Exclusions
Warranty begins at shipment and covers replacement parts and factory repair labor only. Installation, removal, freight, and on site labor are excluded. Normal wear, finish variation, heat discoloration, misuse, improper installation, unauthorized modifications, and indirect damages are not covered.
Returns and Cancellations
Most Modofire products are custom made to order and fabricated specifically for each project.
Cancellations
Orders cancelled within 72 hours receive a full refund. Cancellations after 72 hours and before production are subject to a 3 percent fee. Once production or shipping begins, orders cannot be cancelled.
Returns
Custom and made to order products are not eligible for return. This includes fire pits, fire tables, bowls, planters, sculptures, and all fabricated aluminum, steel, or concrete products.
Standard Items
Eligible standard items must be unused, in original packaging, and returned within 30 days of delivery with prior authorization. A 12 percent restocking fee applies and return shipping is the responsibility of the buyer. Refunds are issued after inspection.
Finish Variations
Minor variations in color, texture, or finish are inherent to the fabrication process and are not considered defects.
Exceptions
If Modofire is unable to fulfill an order due to production or material constraints, a full refund will be issued.
There is currently not a configurator for this product.